Impact testing determines the amount of protection to the toe under various foot pounds of force. Compression testing determines the amount of static pressure a steel/composite toe cap can withstand. Our boots are I75/C75
Footwear is constructed of materials that, when in contact with properly grounded floor surfaces, will safely discharge static build-up through the shoe to the floor. Our testing experience contributed to the SD standard established in Section 6 of the ANSI Z41 and carried over to ASTM F2413-05.
PR footwear reduces the possibility of sharp objects (nails, glass or metal) penetrating through the outsole causing injury to the foot. Protection is provided by a steel or puncture resistant material imbedded in the insole of the footwear.
CSA Approved - Sole Puncture Protection with Grade 1 Protective Toe
CSA Approved - SD
Built with an outsole design and materials that help provide slip-resistance and traction on various surfaces.
Oil and slip-resistant outsole
ASTM F2413 protective toe classification
ASTM F2413 static-dissipative standard
CSA approved Grade 1
No exposed metal on upper
CSA Green Triangle meets CSA standards for Grade 1 protective toe and has a protective plate between the outsole and midsole for puncture resistance
Rubber skin outsole
Removable cushioned footbed
Mark II slip resistant test results: Oily Wet-0.52