Get the right boots for the job with KEEN Utility industrial work boots. With the Philadelphia you get a durable leather work boot suitable for a variety of work environments with KEEN technologies that reduce weight and promote comfort.
This 6-inch work boot has a black with steel grey leather upper that is both waterproof and barnyard-friendly, resisting damage from acids, chlorides and hydroxides found on the ranch and on some industrial sites. Attached with a durable 3/4 Goodyear welt is a KEEN Luftcell PU midsole that is infused with air, reducing weight and increasing shock absorption. Underfoot a non-marking rubber outsole is chemical-resistant and heat-resistant up to 572-degrees. These boots will keep you on your feet with exceptional oil- and slip-resistance ratings, meeting ASTM 2913-13 SATRA standards. Or if you need to climb, the 5/8-inch heel set at a 90-degree angle locks boots into place. Additional safety features include resistance to electrical hazards and a carbon-fiber safety toe that is light weight and very strong - exceeding ASTM standards.
Choose comfort and quality - pick up your pair of KEEN Utility work boots today.
Impact testing determines the amount of protection to the toe under various foot pounds of force. Compression testing determines the amount of static pressure a steel/composite toe cap can withstand. Our boots are I75/C75
Footwear is built with nail-free construction using steel composition toe caps to help insulate you from the ground retard conduction, but is not intended to be primary protection against electric shock. Leather footwear must be dry. Our electrical hazard boots meets and exceeds ASTM F2413-05 electrical hazard standards.
This product is built with quality waterproofing materials to keep you dry in wet environments.
Built with an outsole design and materials that help provide slip-resistance and traction on various surfaces.
Removable PU Footbed
Full-grain waterproof leather
90-degree heel rest
ASTM F2413 protective toe classification
ASTM F2413 electrical hazard standard
Carbon fiber protective toe cap
Oil- and slip-resistant rubber outsole
6 Inches in height
Heat-resistant to 572°F
Left and right asymmetrical toe caps
Cleansport NXT™ for natural odor control
Contoured heel lock
Outsole meets or exceeds ASTM F1677-96 Mark II 0.50 CoF on wet and slippery surfaces
bvseo-msg: Unsuccessful GET. status = 'SERVICE_UNAVAILABLE', msg = 'No callback was configured for service bazaarvoice.http'; Unsuccessful GET. status = 'SERVICE_UNAVAILABLE', msg = 'No callback was configured for service bazaarvoice.http';